… Before we start, my apologies to our Spanish-speaking readers … I had to make a choice between “haja” and “haya”, and in the end it was all up to a coin flip …
As I write this, we’re more than happy with the rapid adoption we’ve seen of torch – not just for immediate use, but also, in packages that build on it, making use of its core functionality.
In an applied scenario, though – a scenario that involves training and validating in lockstep, computing metrics and acting on them, and dynamically changing hyper-parameters during the process – it may sometimes seem like there’s a non-negligible amount of boilerplate code involved. For one, there is the main loop over epochs, and inside, the loops over training and validation batches. Furthermore, steps like updating the model’s mode (training or validation, resp.), zeroing out and computing gradients, and propagating back model updates have to be performed in the correct order. Last not least, care has to be taken that at any moment, tensors are located on the expected device.
Wouldn’t it be dreamy if, as the popular-in-the-early-2000s “Head First …” series used to say, there was a way to eliminate those manual steps, while keeping the flexibility? With luz, there is.
In this post, our focus is on two things: First of all, the streamlined workflow itself; and second, generic mechanisms that allow for customization. For more detailed examples of the latter, plus concrete coding instructions, we will link to the (already-extensive) documentation.
Train and validate, then test: A basic deep-learning workflow with luz
To demonstrate the essential workflow, we make use of a dataset that’s readily available and won’t distract us too much, pre-processing-wise: namely, the Dogs vs. Cats collection that comes with torchdatasets. torchvision will be needed for image transformations; apart from those two packages all we need are torch and luz.
Data
The dataset is downloaded from Kaggle; you’ll need to edit the path below to reflect the location of your own Kaggle token.
dir <- "~/Downloads/dogs-vs-cats"
ds <- torchdatasets::dogs_vs_cats_dataset(
dir,
token = "~/.kaggle/kaggle.json",
transform = . %>%
torchvision::transform_to_tensor() %>%
torchvision::transform_resize(size = c(224, 224)) %>%
torchvision::transform_normalize(rep(0.5, 3), rep(0.5, 3)),
target_transform = function(x) as.double(x) - 1
)Conveniently, we can use dataset_subset() to partition the data into training, validation, and test sets.
train_ids <- sample(1:length(ds), size = 0.6 * length(ds))
valid_ids <- sample(setdiff(1:length(ds), train_ids), size = 0.2 * length(ds))
test_ids <- setdiff(1:length(ds), union(train_ids, valid_ids))
train_ds <- dataset_subset(ds, indices = train_ids)
valid_ds <- dataset_subset(ds, indices = valid_ids)
test_ds <- dataset_subset(ds, indices = test_ids)Next, we instantiate the respective dataloaders.
train_dl <- dataloader(train_ds, batch_size = 64, shuffle = TRUE, num_workers = 4)
valid_dl <- dataloader(valid_ds, batch_size = 64, num_workers = 4)
test_dl <- dataloader(test_ds, batch_size = 64, num_workers = 4)That’s it for the data – no change in workflow so far. Neither is there a difference in how we define the model.
Model
To speed up training, we build on pre-trained AlexNet ( Krizhevsky (2014)).
net <- torch::nn_module(
initialize = function(output_size) {
self$model <- model_alexnet(pretrained = TRUE)
for (par in self$parameters) {
par$requires_grad_(FALSE)
}
self$model$classifier <- nn_sequential(
nn_dropout(0.5),
nn_linear(9216, 512),
nn_relu(),
nn_linear(512, 256),
nn_relu(),
nn_linear(256, output_size)
)
},
forward = function(x) {
self$model(x)[,1]
}
)If you look closely, you see that all we’ve done so far is define the model. Unlike in a torch-only workflow, we are not going to instantiate it, and neither are we going to move it to an eventual GPU.
Expanding on the latter, we can say more: All of device handling is managed by luz. It probes for existence of a CUDA-capable GPU, and if it finds one, makes sure both model weights and data tensors are moved there transparently whenever needed. The same goes for the opposite direction: Predictions computed on the test set, for example, are silently transferred to the CPU, ready for the user to further manipulate them in R. But as to predictions, we’re not quite there yet: On to model training, where the difference made by luz jumps right to the eye.
Training
Below, you see four calls to luz, two of which are required in every setting, and two are case-dependent. The always-needed ones are setup() and fit() :
-
In
setup(), you tellluzwhat the loss should be, and which optimizer to use. Optionally, beyond the loss itself (the primary metric, in a sense, in that it informs weight updating) you can haveluzcompute additional ones. Here, for example, we ask for classification accuracy. (For a human watching a progress bar, a two-class accuracy of 0.91 is way more indicative than cross-entropy loss of 1.26.) -
In
fit(), you pass references to the training and validationdataloaders. Although a default exists for the number of epochs to train for, you’ll normally want to pass a custom value for this parameter, too.
The case-dependent calls here, then, are those to set_hparams() and set_opt_hparams(). Here,
-
set_hparams()appears because, in the model definition, we hadinitialize()take a parameter,output_size. Any arguments expected byinitialize()need to be passed via this method. -
set_opt_hparams()is there because we want to use a non-default learning rate withoptim_adam(). Were we content with the default, no such call would be in order.
fitted <- net %>%
setup(
loss = nn_bce_with_logits_loss(),
optimizer = optim_adam,
metrics = list(
luz_metric_binary_accuracy_with_logits()
)
) %>%
set_hparams(output_size = 1) %>%
set_opt_hparams(lr = 0.01) %>%
fit(train_dl, epochs = 3, valid_data = valid_dl)Here’s how the output looked for me:
Epoch 1/3
Train metrics: Loss: 0.8692 - Acc: 0.9093
Valid metrics: Loss: 0.1816 - Acc: 0.9336
Epoch 2/3
Train metrics: Loss: 0.1366 - Acc: 0.9468
Valid metrics: Loss: 0.1306 - Acc: 0.9458
Epoch 3/3
Train metrics: Loss: 0.1225 - Acc: 0.9507
Valid metrics: Loss: 0.1339 - Acc: 0.947Training finished, we can ask luz to save the trained model:
luz_save(fitted, "dogs-and-cats.pt")Test set predictions
And finally, predict() will obtain predictions on the data pointed to by a passed-in dataloader – here, the test set. It expects a fitted model as its first argument.
torch_tensor
1.2959e-01
1.3032e-03
6.1966e-05
5.9575e-01
4.5577e-03
... [the output was truncated (use n=-1 to disable)]
[ CPUFloatType{5000} ]And that’s it for a complete workflow. In case you have prior experience with Keras, this should feel pretty familiar. The same can be said for the most versatile-yet-standardized customization technique implemented in luz.
How to do (almost) anything (almost) anytime
Like Keras, luz has the concept of callbacks that can “hook into” the training process and execute arbitrary R code. Specifically, code can be scheduled to run at any of the following points in time:
-
when the overall training process starts or ends (
on_fit_begin()/on_fit_end()); -
when an epoch of training plus validation starts or ends (
on_epoch_begin()/on_epoch_end()); -
when during an epoch, the training (validation, resp.) half starts or ends (
on_train_begin()/on_train_end();on_valid_begin()/on_valid_end()); -
when during training (validation, resp.) a new batch is either about to, or has been processed (
on_train_batch_begin()/on_train_batch_end();on_valid_batch_begin()/on_valid_batch_end()); -
and even at specific landmarks inside the “innermost” training / validation logic, such as “after loss computation,” “after backward,” or “after step.”
While you can implement any logic you wish using this technique, luz already comes equipped with a very useful set of callbacks.
For example:
-
luz_callback_model_checkpoint()periodically saves model weights. -
luz_callback_lr_scheduler()allows to activate one oftorch’s learning rate schedulers. Different schedulers exist, each following their own logic in how they dynamically adjust the learning rate. -
luz_callback_early_stopping()terminates training once model performance stops improving.
Callbacks are passed to fit() in a list. Here we adapt our above example, making sure that (1) model weights are saved after each epoch and (2), training terminates if validation loss does not improve for two epochs in a row.
fitted <- net %>%
setup(
loss = nn_bce_with_logits_loss(),
optimizer = optim_adam,
metrics = list(
luz_metric_binary_accuracy_with_logits()
)
) %>%
set_hparams(output_size = 1) %>%
set_opt_hparams(lr = 0.01) %>%
fit(train_dl,
epochs = 10,
valid_data = valid_dl,
callbacks = list(luz_callback_model_checkpoint(path = "./models"),
luz_callback_early_stopping(patience = 2)))What about other types of flexibility requirements – such as in the scenario of multiple, interacting models, equipped, each, with their own loss functions and optimizers? In such cases, the code will get a bit longer than what we’ve been seeing here, but luz can still help considerably with streamlining the workflow.
To conclude, using luz, you lose nothing of the flexibility that comes with torch, while gaining a lot in code simplicity, modularity, and maintainability. We’d be happy to hear you’ll give it a try!
Thanks for reading!
